btConvexHull.h

Go to the documentation of this file.

/*
Stan Melax Convex Hull Computation
Copyright (c) 2008 Stan Melax http://www.melax.com/

This software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software.
Permission is granted to anyone to use this software for any purpose, 
including commercial applications, and to alter it and redistribute it freely, 
subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
*/


#ifndef BT_CD_HULL_H
#define BT_CD_HULL_H

#include "btVector3.h"
#include "btAlignedObjectArray.h"

typedef btAlignedObjectArray<unsigned int> TUIntArray;

class HullResult
{
public:
        HullResult(void)
        {
                mPolygons = true;
                mNumOutputVertices = 0;
                mNumFaces = 0;
                mNumIndices = 0;
        }
        bool                    mPolygons;                  // true if indices represents polygons, false indices are triangles
        unsigned int            mNumOutputVertices;         // number of vertices in the output hull
        btAlignedObjectArray<btVector3> m_OutputVertices;            // array of vertices
        unsigned int            mNumFaces;                  // the number of faces produced
        unsigned int            mNumIndices;                // the total number of indices
        btAlignedObjectArray<unsigned int>    m_Indices;                   // pointer to indices.

// If triangles, then indices are array indexes into the vertex list.
// If polygons, indices are in the form (number of points in face) (p1, p2, p3, ..) etc..
};

enum HullFlag
{
        QF_TRIANGLES         = (1<<0),             // report results as triangles, not polygons.
        QF_REVERSE_ORDER     = (1<<1),             // reverse order of the triangle indices.
        QF_DEFAULT           = QF_TRIANGLES
};


class HullDesc
{
public:
        HullDesc(void)
        {
                mFlags          = QF_DEFAULT;
                mVcount         = 0;
                mVertices       = 0;
                mVertexStride   = sizeof(btVector3);
                mNormalEpsilon  = 0.001f;
                mMaxVertices    = 4096; // maximum number of points to be considered for a convex hull.
                mMaxFaces       = 4096;
        };

        HullDesc(HullFlag flag,
                 unsigned int vcount,
                 const btVector3 *vertices,
                 unsigned int stride = sizeof(btVector3))
        {
                mFlags          = flag;
                mVcount         = vcount;
                mVertices       = vertices;
                mVertexStride   = stride;
                mNormalEpsilon  = btScalar(0.001);
                mMaxVertices    = 4096;
        }

        bool HasHullFlag(HullFlag flag) const
        {
                if ( mFlags & flag ) return true;
                return false;
        }

        void SetHullFlag(HullFlag flag)
        {
                mFlags|=flag;
        }

        void ClearHullFlag(HullFlag flag)
        {
                mFlags&=~flag;
        }

        unsigned int      mFlags;           // flags to use when generating the convex hull.
        unsigned int      mVcount;          // number of vertices in the input point cloud
        const btVector3  *mVertices;        // the array of vertices.
        unsigned int      mVertexStride;    // the stride of each vertex, in bytes.
        btScalar             mNormalEpsilon;   // the epsilon for removing duplicates.  This is a normalized value, if normalized bit is on.
        unsigned int      mMaxVertices;     // maximum number of vertices to be considered for the hull!
        unsigned int      mMaxFaces;
};

enum HullError
{
        QE_OK,            // success!
        QE_FAIL           // failed.
};

class btPlane
{
        public:
        btVector3       normal;
        btScalar        dist;   // distance below origin - the D from plane equasion Ax+By+Cz+D=0
                        btPlane(const btVector3 &n,btScalar d):normal(n),dist(d){}
                        btPlane():normal(),dist(0){}
        
};



class ConvexH 
{
  public:
        class HalfEdge
        {
          public:
                short ea;         // the other half of the edge (index into edges list)
                unsigned char v;  // the vertex at the start of this edge (index into vertices list)
                unsigned char p;  // the facet on which this edge lies (index into facets list)
                HalfEdge(){}
                HalfEdge(short _ea,unsigned char _v, unsigned char _p):ea(_ea),v(_v),p(_p){}
        };
        ConvexH()
        {
        }
        ~ConvexH()
        {
        }
        btAlignedObjectArray<btVector3> vertices;
        btAlignedObjectArray<HalfEdge> edges;
        btAlignedObjectArray<btPlane>  facets;
        ConvexH(int vertices_size,int edges_size,int facets_size);
};


class int4
{
public:
        int x,y,z,w;
        int4(){};
        int4(int _x,int _y, int _z,int _w){x=_x;y=_y;z=_z;w=_w;}
        const int& operator[](int i) const {return (&x)[i];}
        int& operator[](int i) {return (&x)[i];}
};

class PHullResult
{
public:

        PHullResult(void)
        {
                mVcount = 0;
                mIndexCount = 0;
                mFaceCount = 0;
                mVertices = 0;
        }

        unsigned int mVcount;
        unsigned int mIndexCount;
        unsigned int mFaceCount;
        btVector3*   mVertices;
        TUIntArray m_Indices;
};



class HullLibrary
{

        btAlignedObjectArray<class btHullTriangle*> m_tris;

public:

        btAlignedObjectArray<int> m_vertexIndexMapping;


        HullError CreateConvexHull(const HullDesc& desc, // describes the input request
                                   HullResult&     result);        // contains the resulst
        HullError ReleaseResult(HullResult &result); // release memory allocated for this result, we are done with it.

private:

        bool ComputeHull(unsigned int vcount,const btVector3 *vertices,PHullResult &result,unsigned int vlimit);

        class btHullTriangle*   allocateTriangle(int a,int b,int c);
        void    deAllocateTriangle(btHullTriangle*);
        void b2bfix(btHullTriangle* s,btHullTriangle*t);

        void removeb2b(btHullTriangle* s,btHullTriangle*t);

        void checkit(btHullTriangle *t);

        btHullTriangle* extrudable(btScalar epsilon);

        int calchull(btVector3 *verts,int verts_count, TUIntArray& tris_out, int &tris_count,int vlimit);

        int calchullgen(btVector3 *verts,int verts_count, int vlimit);

        int4 FindSimplex(btVector3 *verts,int verts_count,btAlignedObjectArray<int> &allow);

        class ConvexH* ConvexHCrop(ConvexH& convex,const btPlane& slice);

        void extrude(class btHullTriangle* t0,int v);

        ConvexH* test_cube();

        //BringOutYourDead (John Ratcliff): When you create a convex hull you hand it a large input set of vertices forming a 'point cloud'. 
        //After the hull is generated it give you back a set of polygon faces which index the *original* point cloud.
        //The thing is, often times, there are many 'dead vertices' in the point cloud that are on longer referenced by the hull.
        //The routine 'BringOutYourDead' find only the referenced vertices, copies them to an new buffer, and re-indexes the hull so that it is a minimal representation.
        void BringOutYourDead(const btVector3* verts,unsigned int vcount, btVector3* overts,unsigned int &ocount,unsigned int* indices,unsigned indexcount);

        bool CleanupVertices(unsigned int svcount,
                             const btVector3* svertices,
                             unsigned int stride,
                             unsigned int &vcount, // output number of vertices
                             btVector3* vertices, // location to store the results.
                             btScalar  normalepsilon,
                             btVector3& scale);
};


#endif //BT_CD_HULL_H